R10 Man Portable Drill

All-In-One Drilling Rig for small bore, air & mud drilling projects.

The R10 Mini-Tech has available setups for auger, mud or air drilling. These compact units are compatible with all drilling methods currently available. This lightweight unit is man & helicopter portable with low impact, turf friendly tires. These cost effective drill units provide flexibility and power, while maintaining portability and convenience.

image description

R10 Man Portable

zoom
image description

R10 Man Portable

zoom
image description

R10 Man Portable

zoom
image description

R10 Man Portable

zoom
  • image description
  • image description
  • image description
  • image description

R10 Man Portable Specifications 1

R10 Man Portable Specifications 2

ROTARY HEADS : (D4 Drill Head is an available option)
Max Torque 2,700 ft-lbs (3,660 Nm)
Max Speed 80 rpm
Through Bore NA / Optional Side Port Swivel
Speeds Variable - Optional Higher RPM Head
POWER & HYDRAULICS :
System Pressure 2,900 psi (200 bar)
Max Flow 27 gpm (102 lpm)
Max Pullback 6,600 lbs (2,993 kg)
Engine Gas Engine
Engine Power 20hp / 2,900 PSI
Fuel Tank Up to 6 gallons (22 L)
Hydraulic Tank Up to 25 gallons (94 L)
R10 MINI TECH DIMENSION :
Height 104" (2,629 mm)
Weight 926 lbs (420 kg)*
POWER UNIT DIMENSION :
Length 35" (889 mm)
Width 21" (534 mm)
Height 29" (737 mm)
* Dependant on options / Additional upgrades may be required.
Subject to change.
R10 : STANDARD FEATURES
Drill Head - 1,000 ft-lbs Torque / Max 80 RPM.
6 ft Stroke Mast for 5ft rods.
Hydraulic Mast Cylinder - 6,000 lbs pullback/pushdown.
Man-Portable with Low Impact tires for rough terrain.
2-Hydraulic Controls for Drill Operation & Lift.
AVAILABLE OPTIONS :
Air Drilling Rods & Adaptors. (clamps may be required).
Mud Drilling Rods & Adaptors. (clamps may be required).
Breakout Clamps c/w hand-wrench for drill rods.
Remote Controls. Rotation & Feed.
Inline Side-Swivel, 2" for air compressor/water flushing.
Trip Wire Safety System. (European Spec).
Mast Mounted Flood Lights.*
Mono Mud Pump. 150-180 gpm / 300-800 psi.*
Foot Plate and Hydraulic Auger Holder. (Replaces clamps).
D5 Drill Head - 1,280 ft-lbs Torque / Max 480 RPM
D6 Drill Head - 1,420 ft-lbs Torque / Max 380 RPM